Knowledge

references for the shower room in the home decoration



At present, the market is filled with various style of shower room, now have some information as a reference.

1. Structure can be divided into three types: frame-type, semi-frameless and frameless:

Box (1) : metal is mainly for the aluminium alloy or stainless steel material, plate is toughened glass or PS (Polystyrene, Polystyrene) material, when the choose and buy needs to pay attention to whether or not the surface scratch, junction box if closed, the casing outside the above any finishing plastic or metal plate, whether the switch smoothly and directly influence the effect of waterproof door and brake piece between fire and the magnet design and so on.

(2) semi-free frame: the outer frame is aluminum alloy frame or stainless steel material, and the plate is mainly tempered glass.

(3) the different type: mainly by the hinge, clamp, shear and toughened glass, because its design for the different type, should be this design to the wall material and the vertical degree requirements higher, such as light or the whole bathroom compartment, such as in hinge fixed place with reinforcement design, namely can't install, or have a potential safety hazard.

2. Tempered glass: it is generally believed that toughened glass is better than reinforced glass. In western countries, the former is referred to as tenseglass or Toughened Glass. The intensity is 4 ~ 5 times that of normal glass. But note that some manufacturers in order to reduce cost, use heat strengthened glass or half toughened glass, its strength is only general glass 1 ~ 2 times, and its fracture with glass is not in general. Can't compare with the former. The glass used in the shower door needs to meet the standard of safe glass, which can be applied after the test of impact temperature difference damage. In addition, the glass are usually considered as thick as possible, actually otherwise, as long as can pass the test of the former, instead of the thin glass is advantageous to the product and the service life of the heavier (glass of pulley and the greater the burden of hinge) and security. Generally speaking, there is a frame glass door to use 3 ~ 5mm toughened glass, the glass that has no frame glass to use 6 ~ 8mm is enough already.

3, surface treatment, metal surface can be divided into general shower door frame materials electroplating and coating (powder or liquid), irrespective of the process for the coating film thickness, hardness, brightness, degree of adhesion, and presence of through thick salt fog resistance and chemical testing, because its are in a bathroom at higher temperature and often use chemicals in it, so for metal surface treatment cannot treat STH lightly.

4, factory location and its after-sales service: if the shower room with economics perspective, for a durable goods, only it all needs to switch to use daily, in addition to the efforts in adults and children the screws and different, and is due to personal mood ups and downs of improper operation or habits lead to use fixed number of year cannot reach expected. However, mainly pulleys and shower door hinge switch, coupled with the combination of plastic products and hardware fittings, if the manufacturer or its agent to provide professional services to the product, believe that the group will not become the orphans of the bathroom shower room.

5, and the size of the type and specification: each bathroom specifications, size is differ, so when the choice, both objective and subjective factors to consider, in general, the way to open the door can be divided into horizontal pull open and folding. In addition, unless there is a larger shower space. It should avoid the use of internal folding, so as to avoid the occurrence of accidents in the shower, and the door cannot be opened, thus causing regrettable things.

0207.jpg