Knowledge

points of extend service life of shower room




Shower room is a hotspot of market consumption in recent years, a whole shower room saving space, easy installation, and make toilet can effectively dry wet depart, also can have the effect of heat preservation in winter. Many consumers have a question: how to use the shower room after buying it, how to maintain it?

Common sense between wei yu.

After comfortable shower, want to pay attention to daily clean and maintain, make integral shower room service life is longer. Clean maintenance shower room, mainly have four aspects, the maintenance of toughened glass, the maintenance of aluminium alloy frame, the maintenance of hardware fittings and bath tub.

Maintenance of toughened glass: do not hit or hit the glass surface with sharp objects to avoid damage; Do not wipe the glass surface with the corrosive liquid of the water. Do not rub the surface of the glass with coarse material to avoid scratches. Once there are cracks or damage marks, we must first inform the after-sales service, and give replacement and maintenance.

1. To avoid scratching the glass, affect the visual appearance of the shower room, and use soft dry cloth for daily cleaning. 2. For push-pull shower room, attention should be paid to the maintenance of the pulley. The front door should be avoided, and the pulley, slide rail, slide block should be cleaned regularly, and the lubricant should be added on time. 3. For aluminum alloy door frame, if there are stains on the surface of aluminum, wipe with a neutral detergent solution. 4. For the floor of shower room, do not hit or hit the surface with sharp objects so as to avoid damage.

Maintenance of the framework:

The first is to prevent the direct sunlight and the sun exposure, otherwise the spray layer fades; The second cannot be wiped with corrosive liquid or material; Third, the surface should not be wiped with coarse materials (including toothpaste); The fourth cannot depict the surface with a sharp object. If there is a stain on the surface of the aluminum, clean it with a neutral wash.

Hardware fittings maintenance: push-pull shower door, there are two ways of sliding block and sliding wheel. The pulley and sliding block should be careful to avoid slamming the door, so as not to cause the door to fall off. Pay attention to regular cleaning of slide rails, pulley, sliders, lubricating grease (lubricating oil or lubricating wax); Adjust the adjusting screw of sliding block regularly to ensure that the sliding block is effective and smooth for the movable door.

Note: when using the bathroom special detergent, please be sure to use it correctly according to the cautions stated in the container. Incorrect use of the method can cause adverse effects on the human body, and it is easy to cause some undesirable situation. Do not use to clean out the following items: acidic, alkaline solution, drugs such as hydrochloric acid, acetone thinner solvents, such as household cleanser, etc., otherwise will have bad effect to human body, and cause products appear some bad situation.

0112.jpg